| | |
| Pris:
686 Uden moms: 548,86 1-3 dages levering
(hverdage) | |
| | |
CHIEFTEC SST-3141SAS
The SAS / SATA Backplanes as well as the detachable bays, are all exclusively designed and made of Aluminium so that they are especially suited to keeping the HDDs cool. The Backplane is Plug & Play compatible and supports hot swap. With an 80mm fan, even the fastest Hard disks are kept cool. The operating status of each hard drive as well as the power and the activity of the fans are shown in the front of the Backplane by LEDs. In addition, there is a reset button which is also used to stop the alarm for the fans. The Hard disks are screwed unto the trays which can then be easily removed by turning the lock and a spring mechanism in the back will push them out.
SPECIFICATION:
Interface: SAS & SATA I & SATA II
Dimensions (DxWxH): 223,52mm x 147,32mm x 86,36mm
Weight: 1,3 kg
Form-Factor: 3x 5 1/4" bays for 4 HDDs (3,5")
Fan: 80mm sleeve bearing fan
Power Connector: 2x Molex
Data Connector: 4 x SATA
Supported Raid-Levels: 0, 1, 5, 6 and 10. (no Raid controller is included)
Special Features: Connectors at the rear side for:
Fan Failure detection LED
Reset switch for buzzer alarm and
Overheating LED
Scope of delivery: SAS/SATA Backplane, 4x SATA cable (120cm), set of screws, User manual
Anslået leverings tid er mellem 1 og 3 dage.
Oprettet for 11.7 måneder siden
Ændret for 1.8 måneder siden
Pris/Lager Tjek for 25.5 minutter siden (lager: 1)
Googlebot: for 3 måneder siden, snit: 20 dage. Ialt 10 gange.
Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.
